Elastomeric bridge bearings
ATAYA has developed a range of Elasto- Bearing, Which allows for different translation and rotational movements to suit the function of a structure.
v Elasto- Bearing is Available in the following variations as defined by EN 1337-3.
Elasto A
This type of bearing, fully covered with elastomer, comprising only one steel reinforcing plate.
Elasto B
This type of bearing fully covered with elastomer, comprising at Least two steel reinforcing plates;
Elasto C
ATAYA has developed the following types of Elasto C:-
Elasto C2.
Elasto C4.
Elasto B/C
Elasto C2
This type of bearing also features external Steel plates, vulcanized into its upper and lower surfaces; allows external connections to steel plates with shear Dowels or bolts.
Elasto C4
This type of bearing are same as Type C but with Checker plate instead of flat steel plate,
Elasto B/C
These types of bearing are Combination of Types B and C, with only one side featuring an external Steel Plate.
Elasto D
This type of bearing is same as Type B but with PTFE plate vulca-nized in to its upper surface.
Elasto E
This type of bearing is same as Type C with PTFE plate recessed in to its outer steel plate.
Elasto F
This type of bearing made only of rubber without any internal steel plate (not reinforced).
Elasto Fixed bearing
If movements between structural element are to be prevented in one direction or in all direction according to consultant loads .
Elasto Guided Bearing
Same as type C between 2 steel plates with welded restraints to transfer the horizontal load in the transversal direction. They allow horizontal displacements only along one direction.